Clear-Com HLI-FBS User Manual
Page 48
3)
To confirm the selected setting, press the rotary control.
4.2.4
Audio settings for Program IFB [Interruptible Foldback]
IFB allows you to temporarily interrupt the continuous program listen (program feed) and
speak to the channels connected to the program listen. See also 4.4.2 Assigning the
Program Listen to a channel.
To configure the audio settings for Program IFB [Interruptible Foldback]:
1)
In Menu mode, select Audio Settings and then Program IFB.
2)
From the third menu, select IFB Dim Level.
Note:
The IFB Dim Level determines the amount that the volume level of the
Program Level is reduced by when it is interrupted by the IFB.
3)
From the fourth menu (fourth display screen), select one of the following:
• IFB Disabled (default)
• - 6dB
• -12dB
• -18dB
• -24dB
• Full Cut
4)
To confirm the selected setting, press the rotary control.
4.2.5
Audio settings for the SA [Stage Announce] Output
To configure the audio settings for the SA [Stage Announce] Output:
1)
In Menu mode, select Audio Settings and then SA Output.
2)
From the third menu, select Gain.
3)
From the fourth menu, select one of the following:
• + 12dB
• + 6dB
• 0dB (default)
• - 6dB
• - 12dB
4)
To confirm the selected setting, press the rotary control.
48
HelixNet Partyline User Guide