2 assigning the program listen to a channel, 3 assigning a gpo relay to a channel – Clear-Com HLI-FBS User Manual
Page 54
4.4.2
Assigning the Program Listen to a channel
To assign (or unassign) the Program Listen (Program Feed) to a channel:
1)
In Menu mode, select Channels and then the name of the channel.
2)
From the third menu, select Program Listen.
3)
From the fourth menu, select either None, or choose from the list of available
programs.
Note:
The default is None.
4)
To confirm the selected setting, press the rotary control.
Tip:
When you assign the Program Listen to a channel, PGM is displayed on the display screen
(under the listen level bar, to the left) for that channel.
4.4.3
Assigning a GPO relay to a channel
You can assign a relay that is triggered on receiving a call or detecting a talk on a partyline
channel. To assign (or unassign) a relay:
1)
In Menu mode, select Channels and then the name of the channel.
2)
From the third menu, select GPO on Talk or GPO on Call.
3)
From the fourth menu, select either None, or choose from the list of available relays.
Note:
The default is None.
4)
To confirm the selected setting, press the rotary control.
54
HelixNet Partyline User Guide