Clear-Com HLI-FBS User Manual
Page 47
3)
From the fourth menu, select one of the following:
• + 12dB
• + 6dB
• 0dB (default)
• - 6dB
• - 12dB
4)
To confirm the selected setting, press the rotary control.
The GPO trigger activates a relay when receiving a call or activating a talk on a partyline
channel. You can enable or disable the GPO trigger. To configure the audio setting for the
GPO trigger:
1)
In Menu mode, select Audio Settings and then Program Input.
2)
From the third menu, select GPO Trigger.
3)
From the fourth menu, select one of the following:
• Enabled (default)
• Disabled
4)
To confirm the selected setting, press the rotary control.
Note:
You can also configure the GPO trigger using Menu Mode > Modules
Settings.
To select the VOX:
1)
From the third menu, select VOX.
a) From the fourth menu, select one of the following:
• Enabled
• Disabled (default)
2)
To confirm the selected setting, press the rotary control.
To select the VOX Off Delay:
1)
From the third menu, select VOX Off Delay.
2)
From the fourth menus, select one of the following:
• .5 sec (default)
• 1 sec
• 2 sec
• 3 sec
• 4 sec
47
HelixNet Partyline User Guide