2 configuring the relay output – Clear-Com HLI-FBS User Manual
Page 77
5.4.2
Configuring the Relay output
To configure the Control I/O for the Relay output:
1)
In Menu mode, select Control I/O.
2)
From the second menu, select Outputs.
3)
From the third menu, select Relay 1
4)
From the fourth menu, select one of the following:
• None (default)
• Call Key 1
• Talk Key 1
• Call Key 2
• Talk Key 2
• Call Key 3
• Talk Key 3
• Call Key 4
• Talk Key 4
• SA Key
Note:
The number of the key relates to the keyset to which it belongs (for example,
Call Key 1 is the Call key for the first keyset / display screen).
5)
To confirm the selected setting, press the rotary control.
5.5
Connecting the Remote Station to a Main Station using
Ethernet
To connect the Remote Station to a Main Station:
1)
Ensure that the Remote Station is physically connected to the Main Station.
2)
In Menu mode, select Networking, and then Connect to Station.
3)
From the third menu, select the Station ID to connect to.
To set the preferences:
1)
In Menu mode, select Networking, and then Preferences.
77
HelixNet Partyline User Guide