3 selecting station settings, 1 setting preferences, 2 setting keyset assignments – Clear-Com HLI-FBS User Manual
Page 50: 3 setting key latching, Selecting station settings
4.3
Selecting Station Settings
4.3.1
Setting Preferences
To set the Preferences:
1)
In Menu mode, select Station Settings and then Preferences.
2)
From the third menu, select Station ID, and enter a station ID with a maximum of 10
alphanumeric characters. For information about entering characters, see 4.4.1
Editing the channel label.
3)
To confirm the selected setting, press the rotary control.
4.3.2
Setting Keyset Assignments
To set the Keyset Assignments:
1)
In Menu mode, select Station Settings and then Keyset Assign.
2)
From the third menu, select Keyset 1.
3)
From the fourth menu, select a name to assign to the Keyset.
4)
Repeat this procedure for the remaining Keysets.
5)
To confirm the selected setting, press the rotary control.
4.3.3
Setting key latching
To enable or disable front panel keys for latching:
1)
In Menu mode, select Station Settings and then Keysets.
2)
From the third menu, select either:
Key(s)
Description
Talk Latch #1
Talk keys for the four available channels.
Talk Latch #2
Talk Latch #3
Talk Latch #4
SA Output key Key used to talk to a connected public address or Stage
Announce (SA) system.
Table 4-1: Setting key latching
Note:
The RMK (Remote Mic Kill) key is also displayed in the list. This key
cannot be latched. To find out how to enable or disable the RMK key, see
4.3.4 Setting the RMK (Remote Mic Kill) key.
50
HelixNet Partyline User Guide