ACU-RITE MILLPWR Old Style - Manual (Page 72)

DEMONSTRATION
MILLPWR
Page 4-18
Operation Manual
Saving Your Program
The sample part is now completely programmed. Press the
softkey labeled
PROGRAM FUNCTIONS.
Press the SAVE softkey .
Name your program by pressing the numeric keys or
by selecting the
ALPHABET softkey, highlighting a
letter, then pressing the ENTER key. You may select up to eight characters,
mixing numbers and letters if you wish. After you’ve selected a name, press the
USE key to save the program. You will be warned if there's already a program
by that name.
Saving the program means it is stored and will not be lost if
there is a power interruption.
At a later time, you can recall the program by pressing the
PROGRAM FUNCTIONS and LOAD softkeys.
Testing Your Program
If you’re new to MILLPWR programming, you might want to
test your program before you run it. Press RUN OPTIONS , and
select both DRY RUN and GRAPHICS ONLY . Move to the start of the program
by pressing the 1 key followed by the ENTER
key, and press GO . Watch as MILLPWR
shows you how the part program
will be run.
Under RUN OPTIONS , de-select the DRY RUN and GRAPHICS
ONLY options before proceeding.
PROGRAM
FUNCTIONS
SAVE
Key in program name.
If you are past the last
step, MILLPWR will
automatically go to step
1 when you press GO.
1 ENTER
DRY RUN
GRAPHICS
ONLY
RUN
OPTIONS
GO
RUN
OPTIONS
DRY RUN
GRAPHICS
ONLY