ACU-RITE MILLPWR Old Style - Manual (Page 128)

TROUBLESHOOTING GUIDE
MILLPWR
Operation Manual
Page 9-1
Troubleshooting Guide
Introduction:
This Troubleshooting Guide is intended to assist you with
diagnosing problems should you experience any difficulties with your
MILLPWR.
Using the Table:
This MILLPWR Troubleshooting Guide is arranged in three
columns entitled: Symptom, Problem and Recommendation. The
Symptoms are listed in the order of most common, easiest to check,
and least expensive to correct. First, locate the Symptom that best
describes the problem which needs to be corrected. Then, identify the
Problem that most closely matches what the MILLPWR system is
experiencing and implement the corresponding Recommendation as
stated.
This MILLPWR Troubleshooting Guide pertains to the MILLPWR
system specifically and on occasion the machine tool itself. It does
not fully address problems relating to improper tooling, incorrect
feeds and speeds, etc.
NOTE: This MILLPWR Troubleshooting Guide is based upon a system
which has been properly installed by a factory trained and certified
technician and that has had all startup system checks performed.