ACU-RITE MILLPWR Old Style - Manual (Page 20)

DRO
MILLPWR
Operation Manual
Page 2-1
DRO FUNCTIONS
Start-Up
Power Up
•
Make sure the power switch on the back of the Operator’s Console is on.
•
Turn the on/off switch on the side of the controller cabinet ON.
After the program has loaded, the following screen will appear:
X
Y
Z
INC
0.0000
0.0000
ABS
INC
0.0000
0.0000
ABS
INC
0.0000
0.0000
ABS
SERVO OFF FEED 0 100% INCH SCALE 1.0000 TOOL:
ZERO X ZERO Y ZERO Z DATUM
MOVE
TABLE
This is called the “DRO” screen. It shows you the current tool position. Here you
can use several DRO functions to set up your job. In fact, you can use this as a
normal DRO when you use your machine manually.
DRO stands
for “digital
readout”.