ACU-RITE DRO 200E - Manual

Readout Parameter Access Code
An access code must be entered before machine-related parameters can be set or
changed. This prevents inadvertent adjustments to the installation related
(machine) setup parameters.
The access code is 8891
IMPORTANT
Supervisors may wish to remove this page from the Reference manual after
initially setting up the readout system. Retain in a safe place for future
use.
IMPORTANT
Refer to the Setup section. Begin by pressing the S key. When "Setup" is dis-
played, press the 8 , 8 , 9 , 1 , and E keys. The readout is now ready
for machine parameter setting operations.