ACU-RITE MILLPWR Old Style - Manual (Page 114)

SETUP
MILLPWR
Operation Manual
Page 7-3
Scale Factor
The scale factor can be set to scale the workpiece up or down from the programmed
size. All programmed dimensions will be multiplied by this scale factor when the
program is run. The numbers in your program
are not changed.
A scale factor of 1.000 causes the MILLPWR to
use programmed dimensions exactly. Values
greater than 1 cause the
MILLPWR to make
parts larger than the programmed dimensions;
values less than 1 to make parts smaller.
SCALE FACTOR
SCALE
1.0000