ACU-RITE MILLPWR Old Style - Manual (Page 25)

DRO
MILLPWR
Page 2-6
Operation Manual
One Time Milling Functions
Any of the milling functions, except BLEND , can be used “one time” without creating
a program. Press the desired milling function key, fill in the information, and press
GO .
The information for each function will be remembered for the next time you use it.
Each function is described in the Program Steps section.
For many of the milling functions, such as a pocket, you will need to set the proper
tool diameter. You can use the
TOOL key as a one-time function to do this.