ACU-RITE MILLPWR Old Style - Manual (Page 111)

CALCULATOR
MILLPWR
Page 6-14
Operation Manual
•
Press CALC to get to GeoCalc.
•
Highlight the arc.
•
Press the RETURN FEATURE softkey. MILLPWR automatically adds an arc step to
the program and places the arc’s information into the form.
•
Press USE to put the arc into the program.
•
Press the LINE key. The end of the line is at the datum, so enter X2 = 0 , Y2 = 0 in the
TO point, and press USE to keep the line.
The program is now complete.