ACU-RITE MILLPWR Old Style - Manual (Page 22)

DRO
MILLPWR
Operation Manual
Page 2-3
DRO Functions
Reset an Axis
Pressing the ZERO X, ZERO Y, or ZERO Z softkey will zero the incremental position
of that axis.
Inch - Metric
To change the measurement system between inches and metric units, press the
SETUP key to get the INCH and MM softkeys. Select the system you want, and
press USE NEW SETTINGS .
Move Table
This function lets you move the table rapidly using the arrow keys. Pressing the
MOVE TABLE softkey will caution you that the arrow keys no longer move around
the screen, but will instead move the table.
X
Y
Z
INC
0.000
0.0000
ABS
INC
0.000
0.0000 ABS
INC
0.000
0.0000
ABS
SERVO ON FEED 0 100% INCH SCALE 1.0000 TOOL:
MOVE
TABLE
PRESS CANCEL WHEN FINISHED MOVING TABLE.
CAUTION
ARROW KEYS
WILL MOVE TABLE
!
You can’t change
to metric if you
have an “inch”
program active,
and vice versa.
Note that the
arrow keys will
move the table!