Planet Technology WGSW-48040 - Manual (Page 86)

User’s Manual of WGSW-24020/WGSW-48040
-86-
4.8.4 Bandwidth
The Bandwidth screen (refer to figure 4-40) allows network managers to define the bandwidth settings for a specified egress
interface. Modifying queue scheduling affects the queue settings globally. The Bandwidth screen is not used with the Service
mode, as bandwidth settings are based on services.
Figure 4-40 Bandwidth screen
Queue shaping can be based per queue and/or per interface. Shaping is determined by the lower specified value. The queue
shaping type is selected in the Bandwidth screen, include interface, port, LAG, Rate Limit, Ingress Rate Limit Status, Rate
Limit….
The page contains the following fields:
Interface Indicates the interface for which the queue shaping information is displayed. The possible
field values are:
• Port, indicates the port for which the bandwidth settings are displayed.
•
LAG , indicates the LAG for which the bandwidth settings are displayed.
Ingress Rate Limit Status which indicates if rate limiting is defined on the interface.
Rate Limit (62-1000000
Kbps)
Defines the amount of bandwidth assigned to the interface.
The possible field values are 62-1000000 Kbps.
Egress Shaping Rate on
Selected Port
Indicates if rate limiting is enabled on the interface.