2 ip based acl configure sample – Planet Technology WGSW-48040 User Manual
Page 60
User’s Manual of WGSW-24020/WGSW-48040
-60-
4.6.2 IP Based ACL Configure Sample
This section shows how to build a IP Based ACL and apply to specify interface.
■
Sample Case: Deny IP packets to specific Class C network
¾
Purpose:
Verify a positive and negative matches to network IP address with a Class C (24 bit mask) , no matter the rule defined as
permit or deny.
1. Any packets pass through the switch will be dropped – if the Destination IP Addresses match specific Class C.
2. Any packets pass through the switch will be forwarded – if the Destination IP Addresses not match specific Class C.
¾
Case Design:
Action DENY
Match IP
Source IP Address
Any
Destination IP Address
Class C
172.16.0.0 / 255.255.255.0
Applied Interface
Interface g1
¾
Device Connection and Configuration: