Planet Technology WGSW-48040 - Manual (Page 127)

User’s Manual of WGSW-24020/WGSW-48040
-12
• Authentication, which indicates the packet is authenticated.
• Privacy, which indicates the packet is both authenticated and
encrypted.
UDP Port
Displays the UDP port used to send notifications.
The default is 162.
Filter Name
Indicates if the SNMP filter for which the SNMP Notification filter is
defined.
Timeout
Indicates the amount of time (seconds) the device waits before
resending informs.
The default is 15 seconds.
Retries
Indicates the amount of times the device resends an inform request.
The default is 3 seconds.
Use the button when you want to add the Notification Recipient configuration to the relevant table
at the bottom of the screen.
Figure 4-69 Notification Recipient