Planet Technology WGSW-48040 - Manual (Page 273)

User’s Manual of WGSW-24020/WGSW-48040
-27
is generated.
Rising Threshold A sampled statistic threshold. When the current sampled value is greater than or equal to
this threshold, and the value at the last sampling interval is less than this threshold, a
single event is generated.
Falling Threshold A sampled statistic threshold. When the current sampled value is less than or equal to this
threshold, and the value at the last sampling interval is greater than this threshold, a
single event is generated.
Rising Event The event index used when a rising threshold is crossed.
Falling Event The event index used when a falling threshold is crossed.
5.19.8 rmon event
The rmon event global configuration command configures an event. To remove an event, use the no form of this command.
Syntax
rmon event index type [community text] [description text] [owner name]
no rmon event index
ƒ index — The event index. (Range: 1 - 65535)
ƒ type — The type of notification that the device generates about this event. Can have the following values: none, log,
trap , log-trap. In the case of log, an entry is made in the log table for each event. In the case of trap, an SNMP trap is
sent to one or more management stations.
ƒ community text — If an SNMP trap is to be sent, it is sent to the SNMP community specified by this octet string. (Range:
0-127 characters)
ƒ description text — A comment describing this event. (Range: 0-127 characters)
ƒ owner name — Enter a name that specifies who configured this event. If unspecified, the name is an empty string.
(Range: 0-127 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.