Planet Technology WGSW-48040 - Manual (Page 356)

User’s Manual of WGSW-24020/WGSW-48040
-35
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following command manually initiates a re-authentication of the 802.1X-enabled port.
Console (config)# dot1x re-authenticate ethernet e8
5.29.7 dot1x timeout quiet-period
The dot1x timeout quiet-period interface configuration command sets the number of seconds that the switch remains in the
quiet state following a failed authentication exchange (for example, the client provided an invalid password). Use the no form of
this command to return to the default setting.
Syntax
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
ƒ seconds — Time in seconds that the switch remains in the quiet state following a failed authentication exchange with the
client. (Range: 0 - 65535 seconds)
Default Configuration
60
Command Mode
Interface configuration (Ethernet)
User Guidelines
During the quiet period, the switch does not accept or initiate any authentication requests.
The default value of this command should only be changed to adjust for unusual circumstances, such as unreliable links or
specific behavioral problems with certain clients and authentication servers.
If it is necessary to provide a faster response time to the user, a smaller number than the default should be entered.
Examples
The following example sets the number of seconds that the switch remains in the quiet state following a failed authentication