12 show qos map, User guidelines, Example – Planet Technology WGSW-48040 User Manual
Page 256: Syntax, Default configuration, Command mode
User’s Manual of WGSW-24020/WGSW-48040
-25
User Guidelines
This command enables to override the CoS value of tagged packets, with the value configured by the qos cos command.
Example
The following example overrides the CoS of incoming packets.
Console(config)# qos cos override
5.17.12 show qos map
The show qos map user EXEC command displays all the QoS maps.
Syntax
show qos map
[dscp-queue | policed-dscp | dscp-mutation]
dscp-queue — Displays the DSCP to queue map.
policed-dscp — Displays the DSCP to DSCP remark table.
dscp-mutation — Displays the DSCP-DSCP mutation table.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the DSCP port-queue map.
console# show qos map
Dscp-queue map:
d1 : d2 0 1 2 3 4 5 6 7 8 9
---- ---- ---- --- ---- ---- ---- ---- ---- ---- ----
0 : 01 01 01 01 01 01 01 01 02 02
1 : 02 02 02 02 02 02 03 03 03 03
2 : 03 03 03 03 03 03 04 04 04 04
3 : 04 04 05 05 05 05 05 05 05 05
4 : 06 06 06 06 06 06 06 06 07 07
5 : 07 07 07 07 07 07 08 08 08 08
6 : 08 08 08 08