Planet Technology WGSW-48040 - Manual (Page 249)

User’s Manual of WGSW-24020/WGSW-48040
-24
ƒ Queue 2—6/36
ƒ Queue 3—6/36
ƒ Queue 4—6/36
ƒ Queue 5—6/36
ƒ Queue 6—6/36
ƒ Queue 7—6/36
ƒ Queue 8—6/36
Console (config-if)# wrr-queue bandwidth 6 6 6 6 6 6 6 6
5.17.5 priority-queue out num-of-queues
The priority-queue out num-of-queues global configuration command enables the egress queues to be expedite queues. Use
the no form of this command to return to the default values.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
ƒ number-of-queues — Assign the number of queues to be expedite queues. The expedite queues would be the queues
with higher indexes. The range is 1 – 8.
Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
When configuring the priority-queue out num-of-queues command, the weighted round robin (WRR) weight ratios are
affected because there are fewer queues participating in WRR.
Example
The following example sets queue 7, 8 to be an EF queue.
Console (config)# priority-queue out num-of-queues 2
5.17.6 show qos interface
The show qos interface user EXEC command displays interface QoS data.