8 show ip igmp snooping interface, Default configuration, Command mode – Planet Technology WGSW-48040 User Manual
Page 218: User guidelines, Example, Syntax
User’s Manual of WGSW-24020/WGSW-48040
-21
vlan_id — VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows IGMP snooping mrouter information.
Console # show ip igmp snooping mrouter
VLAN Ports
--------- -----------
2 e1
5.9.8 show ip igmp snooping interface
The show ip igmp snooping interface User EXEC command displays IGMP snooping configuration.
Syntax
show ip igmp snooping interface vlan-id
vlan_id — VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The example displays IGMP snooping information.
Console # show ip igmp snooping interface 1
IGMP Snooping is globaly disabled