9 show rmon events, Example, Syntax – Planet Technology WGSW-48040 User Manual
Page 274: Default configuration, Command mode, User guidelines
User’s Manual of WGSW-24020/WGSW-48040
-27
Example
The following example configures an event with the trap index of 10
Console (config)# rmon event 10 log
.
5.19.9 show rmon events
The show rmon events user EXEC command displays the RMON event table.
Syntax
show rmon events
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON event table.
Console# show rmon events
Index Description Type Community Owner Last time sent
--------- ----------------- -------- ----------------- ------------ --------------------
1 Errors Log CLI Jan 18 2002 23:58:17
2 High Broadcast Log-Trap router Manager Jan 18 2002 23:59:48
The following table describes the significant fields shown in the display:
Field
Description
Index
An index that uniquely identifies the event.
Description
A comment describing this event.
Type
The type of notification that the device generates about this event. Can have the following