Planet Technology WGSW-48040 - Manual (Page 33)

User’s Manual of WGSW-24020/WGSW-48040
-33-
Subnet Mask
Allow to input the IP subnet mask address, the factory default value is 255.255.255.0
Deafault Gateway
Allow to input the default gateway address, the factory default value is 0.0.0.0
DNS Server
Allow to input the IP Address for the DNS Server. The Domain Name System (DNS)
converts user-defined domain names into IP addresses.
4.2.3 Time
In the Basic Setup Table, you can see the Time Setup (see figure 4-8), by which you can configure the time settings for the
Switch. You can select SNTP Servers: Server1 for the primary SNTP server and Server2 for the secondary SNTP server.
Figure 4-8 Switch Time screen
The Time page includes the following fields:
„ Set Time
Use System Time Specifies that the system time is not set by an external source but the Local time settings.
Use SNTP Time Specifies that the system time is set via an SNTP server.
„ Local Time