12 sntp unicast client enable, 13 sntp unicast client poll – Planet Technology WGSW-48040 User Manual
Page 180
User’s Manual of WGSW-24020/WGSW-48040
-18
Command Mode
Interface configuration (Ethernet, Port-Channel, VLAN) mode
User Guidelines
Use the sntp client enable global configuration command to enable broadcast clients globally.
Use the sntp anycast client enable global configuration command to enable anycast clients globally.
Examples
The following example enables the SNTP client on the interface.
console (config)# sntp client enable
5.5.12 sntp unicast client enable
The sntp unicast client enable global configuration command enables the device to use the Simple Network
Time Protocol (SNTP) to request and accept Network Time Protocol (NTP) traffic from servers. To disable requesting and
accepting Network Time Protocol (NTP) traffic from servers, use the no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request and accept Network
Time Protocol (NTP) traffic from servers.
console (config)# sntp unicast client enable
5.5.13 sntp unicast client poll
The sntp unicast client poll global configuration command enables polling for the Simple Network Time Protocol (SNTP)