14 show bridge address-table static, Example, Syntax – Planet Technology WGSW-48040 User Manual
Page 168: Default configuration, Command mode, User guidelines
User’s Manual of WGSW-24020/WGSW-48040
-16
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console# show bridge address-table
Aging time is 250 sec
vlan mac address port type
----- ------------------- ------ --------
1 0060.704C.73FF e8 dynamic
1 0060.708C.73FF e8 dynamic
200 0010.0D48.37FF e8 static
5.4.14 show bridge address-table static
The show bridge address-table static privileged EXEC command displays statically created entries in the bridge-forwarding
database.
Syntax
show bridge address-table static
[vlan vlan] [ethernet interface | port-channel port-channel-number]
vlan — Specific valid VLAN, such as VLAN 1.
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
console# show bridge address-table static
Aging time is 300 sec
vlan mac address port type
------ -------------------- ------ -------
1 0060.704C.73FF e8 permanent
1 0060.708C.73FF e8 delete-on-timeout
200 0010.0D48.37FF e8 delete-on-reset