Planet Technology WGSW-48040 - Manual (Page 78)

User’s Manual of WGSW-24020/WGSW-48040
-78-
4.7.5 Port Security
Work security screen (see figure 4-34) can be increased by limiting access on a specific port only to users with specific MAC
addresses. MAC addresses can be dynamically learned or statically configured. Locked port security monitors both received
and learned packets that are received on specific ports. Access to the locked port is limited to users with specific MAC
addresses. These addresses are either manually defined on the port, or learned on that port up to the point when it is locked.
When a packet is received on a locked port, and the packet source MAC address is not tied to that port (either it was learned on
a different port, or it is unknown to the system), the protection mechanism is invoked, and can provide various options.
Unauthorized packets arriving at a locked port are either: Forwarded, Discarded with no trap, Discarded with a trap, Cause the
port to be shut down.
Figure 4-34 Port Security screen
Locked port security also enables storing a list of MAC addresses in the configuration file. The MAC address list can be
restored after the device has been reset.
Disabled ports are activated from the Port Security page.
Interface Where displays the port or LAG name
Lock Interface Which selecting this option locks the specified interface.
Learning Mode Where defines the locked port type. The Learning Mode field is enabled only if
Locked is selected in the Interface Status field. The possible field values are:
• Classic Lock, by which locks the port using the classic lock mechanism. The
port is immediately locked,
regardless of the number of addresses that have already been learned.
• Limited Dynamic Lock, which locks the port by deleting the current dynamic