Planet Technology WGSW-48040 - Manual (Page 164)

User’s Manual of WGSW-24020/WGSW-48040
-16
ƒ port-channel-number-list — Separate non consecutive valid port-channels with a comma and no spaces; a hyphen is
used to designate a range of port-channels.
Default Configuration
Disable forward-all on all ports.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example all multicast packets on port g8 are forwarded.
console (config)# interface vlan 2
console (config-if)# bridge multicast forward-all add ethernet g8
5.4.8 bridge multicast forbidden forward-all
The bridge multicast forbidden forward-all interface configuration command forbids a port to be a forward-allmulticast port.
To restore the default, use the no form of the bridge multicast forward-all command.
Syntax
bridge multicast forbidden forward-all {add | remove} {ethernet interface-list | port-channel port-channel-number-list}
no bridge multicast forward-all
ƒ add — Forbids forwarding all multicast packets.
ƒ remove — Does not forbid forwarding all multicast packets.
ƒ interface-list — Separates non consecutive valid Ethernet ports with a comma and no spaces; a hyphen is used to
designate a range of ports.
ƒ port-channel-number-list — Separates non consecutive valid port-channels with a comma and no spaces; a hyphen is
used to designate a range of port-channels.
Default Configuration
By default, this setting is disabled (for example, forwarding to the port is not forbidden).
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
IGMP snooping dynamically discovers multicast router ports. When a multicast router port is discovered, all the multicast
packets are forwarded to it unconditionally.