Planet Technology WGSW-48040 - Manual (Page 39)

User’s Manual of WGSW-24020/WGSW-48040
-39-
Figure 4-11 Switch Link Aggregation screen
The Link Aggregation page contains the following fields:
LAG Indicates the number of the LAG interface. Up to eight LAG interfaces can be configured.
Description Indicates the description of the LAG ports.
Admin Status Up indicates that the port is available and down shows administrator has taken the port offline.
after setup completed, please click the Save Settings option to save current setting.
Type The port types that comprise the LAG.
Link Status Shows an active connection when you choose the UP button, there is no active connection or
the port has been taken offline by an Admiinistrator when you choose the Down button.
Speed Shows the connection speed on each port and the speed can be configured only when
auto-negotiation is disabled on that port.
Duplex The port duplex mode, Full (transmission occurs in both directions simultaneously) or Half
(transmission occurs in only one direction at a time). This mode can be configured only when
auto-negotiation is disabled and port speed is set to 10Mbps or 100Mbps.
Flow control Shows the flow control status of the port. It is active when the port runs at Full Duplex Mode.
LAG Mode Shows the current mode of the LAG interface.
Click the Detail button for more detail port configuration.
„ Linkl Aggregation detail configuration
At per-LAG detail configuration page, the administrator can select ports to be the members of the LAG interface. The screen