9 show ip ssh, Syntax, Default configuration – Planet Technology WGSW-48040 User Manual
Page 300: Command mode, User guidelines, Example
User’s Manual of WGSW-24020/WGSW-48040
-30
Rmt5nhhqdAtN/4oJfce166DqVX1gWmN
zNR4DYDvSzg0lDnwCAC8Qh
Fingerprint: a4:16:46:23:5a:8d:1d:b5:37:59:eb:44:13:b9:33:e9
5.22.9 show ip ssh
The show ip ssh privileged EXEC command displays the SSH server configuration.
Syntax
show ip ssh
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SSH server configuration.
Console# show ip ssh
SSH server enabled. Port: 22
RSA key was generated.
DSA (DSS) key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP address SSH username Version Cipher Auth Code
---------------- ---------------- --------------- -------------- -------------------
172.16.0.1 John Brown 2.0 3 DES HMAC-SH1
The following table describes the significant fields shown in the display:
Field
Description
IP address
Client address
SSH username
User name
Version
SSH version number
Cipher
Encryption type (3DES, Blowfish, RC4)