Planet Technology WGSW-48040 - Manual (Page 64)

User’s Manual of WGSW-24020/WGSW-48040
-64-
The Page contains the following fields:
ACL Name Displays the user-defined MAC based ACLs
New ACL Name Specifies a new user-defined MAC based ACL name.
Delete ACL By which deletes the selected ACL
Action Indicates the ACL forwarding action. Possible field values are:
• Permit, by which forwards packets which meet the ACL criteria.
• Deny, drops packets which meet the ACL criteria.
• Shutdown, where drops packet that meet the ACL criteria, and disables the
port to which the packet was addressed.
Source MAC Address Matches the source MAC address to which packets are addressed to the ACE.
Wildcard Mask Defines the source IP address wildcard mask. Wildcard masks specify which bits
are used and ignored.
A wild card mask of 255.255.255.255 indicates that no bit is important.
A wildcard of 0.0.0.0 indicates that all the bits are important.
For example, if the source IP address 149.36.184.198 and the wildcard mask is
255.36.184.00, the first eight bits of the IP address are ignored, while the last eight
bits are used.
Dest. MAC Address Where matches the destination MAC address to which packets are addressed to
the ACE.
Wildcard Mask, which defines the destination IP address wildcard mask.
VLAN ID Which matches the packet’s VLAN ID to the ACE.
The possible field values are 2 to 4094.
Ether Type Where specifies the packet’s Ethernet type.
Use the “ Add to List ” button to add the configured MAC Based ACLs to the MAC Based ACL Table at the bottom of
the screen.