8 gvrp commands, 1 gvrp enable (global), 2 gvrp enable (interface) – Planet Technology WGSW-48040 User Manual
Page 207
User’s Manual of WGSW-24020/WGSW-48040
-20
e1 8000
e2 Disabled
e3 Disabled
5.8 GVRP Commands
5.8.1 gvrp enable (global)
GVRP, or GARP VLAN Registration Protocol, is an industry-standard protocol designed to propagate VLAN information from
device to device. With GVRP, a single switch is manually configured with all desired VLANs for the network, and all other
switches on the network learn these VLANs dynamically.
The gvrp enable global configuration command enables GVRP globally. To disable GVRP globally on the switch, use the no
form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example globally enables GVRP on the device.
Console (config)# gvrp enable
5.8.2 gvrp enable (interface)
The gvrp enable interface configuration command enables GVRP on an interface. To disable GVRP on an interface, use the no
form of this command.
Syntax
gvrp enable