4 description, 5 speed, Syntax – Planet Technology WGSW-48040 User Manual
Page 192: Default configuration, Command mode, User guidelines, Example
User’s Manual of WGSW-24020/WGSW-48040
-19
5.7.4 description
The description interface configuration command adds a description to an interface. To remove the description use the no form
of this command.
Syntax
description string
no description
string—Comment or a description of the port up to 64 characters.
Default Configuration
By default, the interface does not have a description.
Command Mode
Interface Configuration (Ethernet, port-channel, out-of-band Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds a description to the Ethernet e5.
Console(config)# interface ethernet e5
Console(config-if)# description RD_SW#3
5.7.5 speed
The speed interface configuration command configures the speed of a given Ethernet interface when not using auto-negotiation.
To restore the default, use the no form of this command.
Syntax
speed
{10 | 100 | 1000}
no speed
10—Configures the port to 10 Mbps.
100—Configures the port to 100 Mbps.
1000—Configures the port to 1000 Mbps.
Default Configuration
Maximum port capability.
Command Mode
Interface Configuration (Ethernet, port-channel, out-of-band Ethernet) mode