28 web server commands, 1 ip http server, 2 ip http port – Planet Technology WGSW-48040 User Manual
Page 348: Syntax, Default configuration, Command mode, User guidelines, Example
User’s Manual of WGSW-24020/WGSW-48040
-34
219 372
5.28 Web Server Commands
5.28.1 ip http server
The ip http server global configuration command enables the device to be configured from a browser. To disable this function
use the no form of this command.
Syntax
ip http server
no ip http server
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables the device to be configured from a browser.
Console (enable)# ip http server
5.28.2 ip http port
The ip http port global configuration command specifies the TCP port for use by a web browser to configure the device. To use
the default TCP port, use the no form of this command.
Syntax
ip http port port-number
no ip http port
port-number — Port number for use by the HTTP server. (Range: 0 - 65535)