16 map protocol protocols-group, Syntax, Default configuration – Planet Technology WGSW-48040 User Manual
Page 343: Command mode, User guidelines, Example
User’s Manual of WGSW-24020/WGSW-48040
-34
Console (config)# interface ethernet e8
Console (config-if)# switchport forbidden vlan add 234-256
5.27.16 map protocol protocols-group
The map protocol protocols-group VLAN database command adds a special protocol to a named group of protocols, which
may be used for protocol-based VLAN assignment. To delete a protocol from a group, use the no form of this command.
Syntax
map protocol protocol
[encapsulation] protocols-group group
no map protocol protocol encapsulation
protocol — The protocol is a protocol number or one of the reserved names. The format is Hex format.
encapsulation — One of the following values: ethernet, rfc1042, llcOther. If no option is indicated the default is
ethernet
.
group — Group number of group of protocols associated together. (Range: 1 - 2147483647)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
The following protocol names are reserved:
ip-arp
ipx
Example
The following example maps protocol ip-arp to the group named "213".
Console (config)# vlan database
Console (config-vlan)# map protocol ip-arp protocols-group 213