Planet Technology WGSW-48040 - Manual (Page 44)

User’s Manual of WGSW-24020/WGSW-48040
-44-
Port Mode VLAN Membership Frame Leave
Access Belongs to a single untagged VLAN
Untagged
( Tag=PVID be removed)
General
Allowed to belongs to multiple untagged VLANs at
the same time
Untagged
(Tag=PVID be removed)
Trunk
Allowed to belongs to multiple Tagged VLANs at
the same time
Tagged
(Tag=PVID or Original VID be remained)
4.4.3 Ports to VLAN
The Ports to VLAN screen contains fields for configuring ports to a VLAN. The port default VLAN ID (PVID) is configured on the
Create VLAN screen. All untagged packets arriving to the device are tagged by the ports PVID. The Ports to VLAN screen
contains a Port Table for VLAN parameters for each port. Ports are assigned VLAN membership by selecting and configuring
the presented configuration options, please refer to figure 4-16.
e
Figure 4-16 Ports to VLAN screen
The page contains the following fields:
VLAN Where means the VLAN number.
Access Indicates the port belongs to a single untagged VLAN. When a port is in Access
mode, the packet types which are accepted on the port cannot be designated.
Ingress filtering cannot be enabled/disabled on an access port.
Trunk Which indicates the port belongs to VLANs in which all ports are tagged, except for
one port that can be untagged.
General Which indicates the port belongs to VLANs, and each VLAN is user-defined as
tagged or untagged (full 802.1Q mode).
Tagged Defines the interface as a tagged member of a VLAN. All packets forwarded by the
interface are tagged. The packets contain VLAN information.
Untagged Packets forwarded by the interface are untagged.
Forbidden Forbidden ports are not included in the VLAN.
Exclude Excludes the interface from the VLAN. However, the interface can be added to the
VLAN through GVRP.