3 bridge multicast forward all – Planet Technology WGSW-48040 User Manual
Page 117
User’s Manual of WGSW-24020/WGSW-48040
-11
4.10.3 Bridge Multicast Forward All
The Bridge Multicast Forward All Screen contains fields for attaching ports or LAGs to a device attached to a neighboring
Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are forwarded to the appropriate port or VLAN.
Refer to figure 4-60.
Figure 4-60
Multicast Bridge Forward All screen
The Bridge Multicast Forward All Screen contains the following fields:
VLAN ID
For which Multicast parameters are displayed. This identifies a VLAN to be
configured to a Multicast service.
Interface
Displays Interface that can be added to a Multicast service.
The configuration options are as follows:
• Static, indicates the port is user-defined.
• Dynamic, indicates the port is configured dynamically.
• Forbidden, forbidden ports are not included the Multicast group, even if IGMP
snooping designated the port to join a Multicast group.
•
None
, displays the port is not configured for Multicast service.
LAG
Displays LAG that can be added to a Multicast service.