13 show dot1x users, Syntax, Default configuration – Planet Technology WGSW-48040 User Manual
Page 362: Command mode, User guidelines, Example
User’s Manual of WGSW-24020/WGSW-48040
-36
Last Authentication
Time since last authentication.
Mac address
The supplicant MAC address.
5.29.13 show dot1x users
The show dot1x users privileged EXEC command displays 802.1X users for the switch.
Syntax
show dot1x users
[username username]
username — Supplicant username
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays 802.1X users.
console# show dot1x users
Username Session Time Last Auth Auth Method MAC Address
Interface
--------------- -------------------- --------------- ------------------ ---------------------
--------------
Bob 1d3h 58m Remote
0008.3b79.8787 1/1
John 8h19m 2m None
0008.3b89.3127 1/2
The following table describes the significant fields shown in the display: