beautypg.com

7 qos map dscp-queue, Syntax – Planet Technology WGSW-48040 User Manual

Page 252

background image

User’s Manual of WGSW-24020/WGSW-48040

-25

6 Disable N/A N/A
7 Enable 178000 8000
8 Enable 23000 1000

The following example displays output from the show qos interface g1 policers command

Console# show qos interface ethernet g1 policers

Ethernet g1

Class map: A

Policer type: aggregate

Committed rate: 192000 bps

Committed burst: 9600 bytes

Exceed-action: policed-dscp-transmit

Class map: B

Policer type: single

Committed rate: 192000 bps

Committed burst: 9600 bytes

Exceed-action: drop

Class map: C

Policer type: none

Committed rate: N/A

Committed burst: N/A

Exceed-action: N/A

5.17.7 qos map dscp-queue

The qos map dscp-queue global configuration command modifies the DSCP to queue map. To return to the default map, use

the no form of this command.

Syntax

qos map dscp-queue dscp-list to queue-id

no qos map dscp-queue

dscp-list

—Specify up to 8 DSCP values, separate each DSCP with a space. (Range: 0 - 63)

queue-id

—Enter the queue number to which the DSCP value corresponds.

QoS Commands

qos trust (Global)

Copyright © 2004 Marvell

CONFIDENTIAL

Doc. No. MV-S200005-00 Rev. C

January 19, 2004, Preliminary

Document Classification: Proprietary Information Page 147

This manual is related to the following products: