Planet Technology WGSW-48040 - Manual (Page 71)

User’s Manual of WGSW-24020/WGSW-48040
-71-
The Page contains the following fields:
IP Address
The Authentication Server IP address.
Priority
Displays the server priority. The possible values are 0-65535, where 1 is the
highest value. The RADIUS Server priority is used to configure the server query
order.
Authentication Port
Identifies the authentication port. The authentication port is used to verify the
RADIUS server authentication. The authenticated port default is 1812.
Number of Retries
Defines the number of transmitted requests sent to RADIUS server before a failure
occurs. The possible field values are 1 - 10. 3 is the default value.
Timeout for Reply
This defines the amount of the time in seconds the device waits for an answer from
the RADIUS server before retrying the query, or switching to the next server.
The possible field values are 1 - 30. 3 is the default value.
Dead Time
This defines the amount of time (minutes) that a RADIUS server is bypassed for
service requests. The range is 0-2000. The Dead Time default is 0 minutes.
Key String
This defines the default key string used for authenticating and encrypting all
RADIUS communications between the device and the RADIUS server.
This key must match the RADIUS encryption.
Source IP Address
Defines the source IP address that is used for communication with RADIUS
servers.
Usage Type
Specifies the RADIUS server authentication type. The default value is Login. The
possible field values are:
• Login, indicates that the RADIUS server is used for authenticating user name
and passwords.
• 802.1X, indicates that the RADIUS server is used for 802.1X authentication.
• All, where indicates that the RADIUS server is used for authenticating user
name and passwords, and 802.1X port authentication.
Use the Add to List button when you add the RADIUS configuration to the RADIUS Table at the bottom of the screen.