Planet Technology WGSW-48040 - Manual (Page 140)

User’s Manual of WGSW-24020/WGSW-48040
-14
There are five items, as below:
Server
Specifies the server to which logs can be sent.
UDP Port (1-65535)
Defines the UDP port to which the server logs are sent. The possible range is 1 to
65535.
The default value is 514.
Facility
Defines a user-defined application from which system logs are sent to the remote
server. Only one facility can be assigned to a single server. If a second facility level
is assigned, the first facility is overridden. All applications defined for a device utilize
the same facility on a server. The possible field values are Local 0 - Local 7.
The field default is Local 7.
Description
Where provides a user-defined server description.
Minimum Severity
Indicates the Minimum severity from which logs are sent to the server. For example,
if Notice is selected, all logs from a Notice severity and higher are sent to the
remote server.
If you want to add the Server Log configuration to the Server Log Table, use the Add to List button at the bottom of the screen.
#
Notice: When a severity level is selected, all severity level choices above the selection are selected automatically.
4.12.13 Memory Logs
The Memory Log screen (see figure 4-84) contains all system logs in a chronological order that are saved in RAM (Cache), Log
Index which shows the log number, Log Time at which the log was generated, Severity which shows the log severity, and the
description that shows log message text.
Figure 4-84 Memory Logs screen