10 show rmon log, Syntax, Default configuration – Planet Technology WGSW-48040 User Manual
Page 275: Command mode, User guidelines, Example
User’s Manual of WGSW-24020/WGSW-48040
-27
values: none, log, trap, log-trap. In the case of log, an entry is made in the log table for each
event. In the case of trap, an SNMP trap is sent to one or more management stations.
Community
If an SNMP trap is to be sent, it is sent to the SNMP community specified by this octet string.
Owner
The entity that configured this event.
Last time sent
The time this entry last generated an event. If this entry has not generated any events, this
value is zero.
5.19.10 show rmon log
The show rmon log user EXEC command displays the RMON logging table.
Syntax
show rmon log
[event]
event — Event index. (Range: 0 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON logging table.
Console# show rmon log
Maximum table size: 500
Event Description Time
--------- ----------------- ---------
1 Errors Jan 18 2002 23:48:19
1 Errors Jan 18 2002 23:58:17
2 High Broadcast Jan 18 2002 23:59:48
Console# show rmon log
Maximum table size: 500 (800 after reset)
Event Description Time
--------- ---------------- ---------