16 show sntp configuration, Syntax, Default configuration – Planet Technology WGSW-48040 User Manual
Page 183: Command mode, User guidelines, Examples
User’s Manual of WGSW-24020/WGSW-48040
-18
5.5.16 show sntp configuration
The show sntp configuration Privileged EXEC command shows the configuration of the Simple Network Time Protocol
(SNTP), use
Syntax
show sntp configuration
This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
Console# show sntp configuration
Polling interval: 7200 seconds.
MD5 Authentication keys: 8, 9
Authentication is required for synchronization.
Trusted Keys: 8,9
Unicast Clients Polling: Enabled.
Server Polling Encryption Key
----------- ----------- ----------------------
176.1.1.8 Enabled 9
176.1.8.179 Disabled Disabled
Broadcast Clients: Enabled
Broadcast Clients Poll: Enabled
Broadcast Interfaces: 1/1, 1/3
OOB SNTP servers
Server Polling Encryption Key
----------- ------------ ----------------------
10.1.1.91
Enabled 9
Broadcast Clients: Enabled