Planet Technology WGSW-48040 - Manual (Page 294)

User’s Manual of WGSW-24020/WGSW-48040
-29
hello 2, max age 20, forward delay 15
Interface Port ID Cost Set Designated Port ID
Name Prio. Nbr Cost Bridge ID Prio. Nbr
------------- -------------- --------- ------ ----------------------- ---------------
g1 128.1 19 FWD 38 32768 0030.9441.62c1 128.25
g2 128.2 19 FWD 57 32769 0002.4b29.7a00 128.25
ch1 128.65 19 FWD 57 32769 0002.4b29.7a00 128.65
The following example displays spanning-tree information for port g1.
Console# show spanning-tree ethernet g1
Interface Port ID Cost Set Designated Port ID
Name Prio. Nbr Cost Bridge ID Prio. Nbr
------------- -------------- --------- ------ ----------------------- ---------------
g1 128.1 19 FWD 38 32768 0030.9441.62c1 128.25
Spanning tree enabled
Type: point-to-point (configured: auto)
Port Fast: no (configured: no)
Number of transitions to forwarding state: 1
BPDU: sent 2, received 120638
5.22 SSH and SLOGIN Commands
5.22.1 ip ssh port
The ip ssh port global configuration command specifies the port to be used by the SSH server. To use the default port, use the
no form of this command.
Syntax
ip ssh port port-number
no ip ssh port
ƒ port-number — Port number for use by the SSH server (Range: 1 - 65535).