Planet Technology WGSW-48040 - Manual (Page 45)

User’s Manual of WGSW-24020/WGSW-48040
-45-
4.4.4 GVRP
GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership information
among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without
having to individually configure each bridge and register VLAN membership. The Global System LAG information displays the
same field information as the ports, but represents the LAG GVRP information. The GVRP screen (refer to 4-17) is divided into
two areas, GVRP and GVRP Table. The field definitions for both areas are the same.
Figure 4-17 GVRP configuration screen
The page contains the following fields:
Enable GVRP Enables and disables GVRP on the device.
Interface
Displays the interface on which GVRP is enabled. Possible field values are:
Port
- indicates the port number on which GVRP is enabled.
LAG - indicates the LAG number on which GVRP is enabled.
GVRP State When the checkbox is checked, GVRP is enabled on the interface.
Dynamic VLAN Creation When the checkbox is checked, Dynamic VLAN creation is enabled on the interface.
GVRP Registration
When the checkbox is checked, VLAN registration through GVRP is enabled on the
device.
Update
The Update button adds the configured GVRP setting to the table at the bottom of the
screen.