Planet Technology WGSW-48040 - Manual (Page 361)

User’s Manual of WGSW-24020/WGSW-48040
-36
* Port is down or not present
Console# show dot1x ethernet e3
Interface Admin Mode Oper Mode Reauth
Reauth Username
Control Period
1/e3 Auto Unauthorized Ena
3600 Clark
State: held
Quiet period: 60
Tx period: 30
Max req: 2
Login Time: n/a
Last Authentication: n/a
MAC Address: 0008.7832.9878
Authentication Method: Remote
Termination Cause: Supplicant logoff
The following table describes the significant fields shown in the display:
Field Description
Interface The interface number.
Admin mode The admin mode of the port. Possible values are: Force-auth, Force-unauth, Auto
Oper mode The oper mode of the port. Possible values are: Authorized, Unauthorized.
Reauth Control Reauthentication control.
Reauth Period Reauthentication peiod.
Username The User-Name representing the identity of the Supplicant.
State The current value of the Authenticator PAE state machine.
Quiet period The number of seconds that the switch remains in the quiet state following a failed
authentication exchange (for example, the client provided an invalid password).
Tx period The number of seconds that the switch waits for a response to an Extensible Authentication
Protocol (EAP)-request/identity frame from the client before resending the request.
Max req The maximum number of times that the switch sends an Extensible Authentication Protocol
(EAP)-request/identity frame (assuming that no response is received) to the client before
restarting the authentication process.
Login Time How long the user is logged in.