2 radius-server key, 3 radius-server retransmit – Planet Technology WGSW-48040 User Manual
Page 259
User’s Manual of WGSW-24020/WGSW-48040
-25
5.18.2 radius-server key
The radius-server key global configuration command sets the authentication and encryption key for all RADIUS
communications between the router and the RADIUS daemon. To reset to the default, use the no form of this command.
Syntax
radius-server key [key-string]
no radius-server key
key-string — Specifies the authentication and encryption key for all RADIUS communications between the router and the
RADIUS server. This key must match the encryption used on the RADIUS daemon. The key can be up to 128 characters
long.
Default Configuration
The default is an empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the authentication and encryption key for all RADIUS communications between the
device and the RADIUS daemon to "abc-server".
Console (config)# radius-server key abc-server
5.18.3 radius-server retransmit
The radius-server retransmit global configuration command specifies the number of times the software searches the list of
RADIUS server hosts. To reset the default configuration, use the no form of this command.
Syntax
radius-server retransmit retries
no radius-server retransmit
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode