Planet Technology WGSW-48040 - Manual (Page 108)

User’s Manual of WGSW-24020/WGSW-48040
-10
The page contains the following fields:
„ Instance Configuration
Press the VLAN Instance Configuration button, a new window popup. Assgin selected VLAN to specify MST Instance at the
VLAN Instatnce Configuration page. The screen in Figure 4-54 appears.
Figure 4-54 MSTP VLAN Instance Configuration screen
Instance ID
Defines the VLAN group to which the interface is assigned.
„ Included VLANs
Included VLAN
Where maps the selected VLAN to the selected instance. Each VLAN belongs to one instance.
„ Instance Settings
Bridge Priority
Specifies the selected spanning tree instance device priority. The field range is
0-61440.
Designated Root Bridge ID
which indicates the ID of the bridge with the lowest path cost to the instance ID.
Root Port
Where indicates the selected instance’s root port.
Root Path Cost
Indicates the selected instance’s path cost.
Bridge ID
Indicates the bridge ID of the selected instance.
Remaining Hops
Indicates the number of hops remaining to the next destination.