5 show management access-list, Command mode, User guidelines – Planet Technology WGSW-48040 User Manual
Page 235: Example, Syntax, Default configuration
User’s Manual of WGSW-24020/WGSW-48040
-23
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an access-list called "mlist" as the management access-list.
Console (config)# management access-class mlist
5.13.5 show management access-list
The show management access-list privileged EXEC command displays management access-lists.
Syntax
show management access-list
[name]
name — Name of the access list. If unspecified, defaults to an empty access-list.(Range: Valid name)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the active management access-list.
Console# show management access-list
mlist
-------
permit ethernet g1
permit ethernet g9
! (Note: all other access implicitly denied)