3 show copper-ports cable-length, 4 show fiber-ports optical-transceiver, Syntax – Planet Technology WGSW-48040 User Manual
Page 238: Default configuration, Command mode, User guidelines, Example
User’s Manual of WGSW-24020/WGSW-48040
-23
e5 Fiber - -
5.14.3 show copper-ports cable-length
The show copper-ports cable-length privileged EXEC command displays the estimated copper cable length attached to a
port.
Syntax
show copper-ports cable-length
[interface]
interface — A valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This feature works only on 1-Gbps ports.
Example
The following example displays the estimated copper cable length attached to all ports.
Console# show copper-ports cable-length
Port Length [meters]
------ ---------------------
e1 < 50
e2 Giga link not active
e3 110-140
e4 Fiber
5.14.4 show fiber-ports optical-transceiver
The show fiber-ports optical-transceiver privileged EXEC command displays the optical transceiver diagnostics.
Syntax
show fiber-ports optical-transceiver
[interface] [detailed]
interface — A valid Ethernet port.