Planet Technology WGSW-48040 - Manual (Page 144)

User’s Manual of WGSW-24020/WGSW-48040
-14
To return from Privileged mode to User EXEC mode, use the following disable commands.
The following example illustrates how to access Privileged mode and return back to the User EXEC mode:
console > enable
enter Password: * * * * *
console #
console # disable
console >
Exit is used to move back from any mode to a previous level mode, except from Privileged EXEC to User EXEC mode, for
example from Interface Configuration mode to Global Configuration mode, and from Global Configuration mode to Privileged
EXEC mode.
Global Configuration Mode
Global configuration commands apply to features that affect the system as a whole, rather than just a specific interface. The
Privileged EXEC mode command configure is used to enter the Global Configuration mode.
The Global Configuration mode commands perform the following:
At the Privileged EXEC mode prompt enter the command configure and press . The Global Configuration mode
prompt is displayed. The Global Configuration mode prompt consists of the device "host name" followed by the word "(config)"
and "#".
console #
To return from Global Configuration mode to Privileged EXEC mode, the user can use one of the following commands:
ƒ exit
ƒ end
ƒ Ctrl+Z
The following example illustrates how to access Global Configuration mode and teturn back to the Privileged EXEC mode:
console #
console # configure
console(config) # exit
console #
Interface Configuration Mode and Specific Configuration Modes
Interface Configuration commands are to modify specific interface operations. The following are the Interface Configuration
modes: